Infocus LP70+ Guía de usuario descargar pdf (Pagina 19)

SETTING UP THE PROJECTOR

1 Place the projector on a flat surface.

• The projector must be within 6 feet (1.8 m) of your power

source and your computer.

• If you want to project from behind a translucent screen, set

up the projector behind your screen. See “Rear” on page 24

to reverse the image.

2 Position the projector the desired distance from the screen.

NOTE: The projector must be at

least 4.9 feet (1.5 m) from the

projection screen.

•

If the image is too big or too small, use the zoom ring to

adjust the size or move the projector forward or backward.

Figure 5 shows three projected image sizes. For more infor-

mation about image size, see “Projected Image Size” on

page 38.

FIGURE 5

Projected image size

3 Make sure the projector and the computer are turned off.

4.9 ft./

9.9 ft./

33 ft./

10m

1.5m

LP70.book Page 5 Friday, February 13, 2004 7:39 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 66 67

Sin comentarios

Infocus LP70+ Guía de usuario Pagina 19