Infocus IN5144A Manual de usuario descargar pdf (Pagina 66)

OPTION menu

Item Description

DIRECT POWER

Using the ▲/▼ buttons turns the DIRECT POWER ON function on/

off,

OFF

When this function is ON, the lamp inside the projector will automatically

turn on when the projector is supplied with power instead of following

the usual procedure (



• After the lamp is turned on using the DIRECT POWER ON function

and the 30 minutes have lapsed without a signal source input or

any user operation, the projector will turn off, even when the AUTO

POWER OFF function (



below

) is disabled.

AUTO POWER

OFF

Using the ▲/▼ buttons adjusts the time to count down to

automatically turn the projector off.

Long (max. 99 minutes)

Short (min. 0 minute = DISABLE)

When the time is set to 0, the projector will not turn off automatically.

When the time is set to 1 to 99 and there has been not been a

compatible signal within that time, the projector lamp will turn off.

If one of the projector or remote control buttons is pressed or a

command (except read commands) is transmitted to the

CONTROL

port during the corresponding time, the projector will not turn off.

Refer to the section

Turning off the power

(



SHUTTER TIMER

Using the ▲/▼ buttons sets the time from closing the lens shutter

to automatically turning the projector off.

• The shutter will open automatically when the projector is turned on

again.

(continued on next page)

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 122 123

Sin comentarios

Infocus IN5144A Manual de usuario Pagina 66