Infocus IN5132 Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 33
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
13
3.1 Displaying STACK menu
Use the ▲/▼/◄/► buttons to go into the fol-
lowing menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen. (
Operating Guide
OPTION menu
) The
setting for Intelligent Stack operation starts from this menu.
Set up Intelligent Stack settings in the STACK menu.
NOTE • If you are using Simple Stack without an RS-232 connection, skip this
chapter.
• If you do not need to change the settings made during the installation process
described in the previous chapter, go to
3.3 Selecting lamp operation mode
.
(
15
)
• Read
3.7 Important information for Intelligent Stack
carefully. (
20
)
NOTE • Check that the following settings are made on both projectors.
Otherwise, the STACK menu on the projectors cannot be selected. (
5
)
- STANDBY MODE in SETUP menu: NORMAL
(
Operating Guide
SETUP menu
)
- COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(
Operating Guide
OPTION menu
)
- STACK LOCK in SECURITY menu: OFF (
5
)
3. STACK menu settings
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 32 33

Comentarios a estos manuales

Sin comentarios